MODEL‐FYRJ

4ma make Y‐type jacketed flush bottom valves ideally suitable for the free flowing of liquid or slurry which tends to change its physical/chemical state while passing through the valve due to differential temperature. to maintain these physical/chemical properties y‐type flush bottom valves are provided with a jacket to circulate the required cooling or heating media to keep the properties of following material constant.

Due to the y shape of the valves it known as y type flush bottom valve as these valves are fitted at the bottom of tanks to drain the content, they are also known as flush bottom tank valve or bottom flush valve, or bottom valve. We manufactured these valves for both opening upwards into vessel and opening downwards into the valve.

OPERATION
Manual (hand wheel)
Pneumatic (S/A diaphragm actuator, D/A cylinder actuator)
Motorized

SIZES
1’’ to 10’’ (25mm to 250mm)
(higher size on request)

WORKING PRESSURE
Up to 6 kg/cm2

TEMPERATURE
UPTO 250°C

LEACKAGE
CLASS VI

MATERIAL OF CONSTRUCTION
S.S.304 / S.S.304L / S.S.316 / S.S.316L
(special alloy on request)

SEALS
PTFE / CFT / GFT

MEDIA
AIR / WATER / OIL / POWDER / SOLVENTS

CONNECTION
ASME B16.5 150#
ASME B16.5 300#
BS10 TABLE D (ON REQUEST)

Angle Type Flush Bottom Valve Reduce Bore Jacketed Type
Angle Type Flush Bottom Valve Reduce Bore Jacketed Type